Tightening A Chain

Chainsaw tension is extremely important for safe and effective use of a chainsaw. This how-to will describe exactly how to tighten the tension of a Prokut chain and list which tools are needed to perf...

Chainsaw tension is extremely important for safe and effective use of a chainsaw. This how-to will describe exactly how to tighten the tension of a Prokut chain and list which tools are needed to perform this task.

In order to have a chainsaw operating well and safely, chainsaw tension is very important. If your chain is hanging low and is sitting away from the bar, you are due for a tightening.

How to Tighten the Saw Bar 

Before adjusting the tension of the chain, we need to make sure that the bar is loose. On the side of your chainsaw, you should see two nuts and a tensioning screw. Firstly, use a combination bar spanner to loosen the nuts to allow you to move the bar up and down. This means when we use the tensioning screw, the bar will move forward to tighten the chain and backwards to loosen it. 

How to Tighten the Chain

Start by holding up the bar once it’s been loosened, and using a combination screw, turn it clockwise and tighten it until the chain comes up and meets the bar. Then, tighten the nuts again to keep the bar in place. 

After you’ve tightened the chain, you want to run the chain forward to test that it is working smoothly and is free from any debris. Always use your bar spanner to do this. Hold the chainsaw firmly, place the spanner on the chain and slowly push it away from yourself. The chain should rotate around the bar properly and not give any resistance. If it is still too loose, you can repeat the steps to tighten it a bit more. Don’t over tighten the chain, a firm amount of pressure will do the trick. 

Have Questions? 

If you’d like some assistance tightening your chainsaw, it’s always a good idea to visit your local dealer to get expert help. To find out more about our chainsaws and other products, contact our friendly team or head to our website for more information.

Tightening A Chain

You may also be interested in

Safe Starting Methods For Chainsaws

Ensuring you know how to start up your chainsaw safely is key. There are a few different techniques for starting up your unit, so pick one that best suits you and get cutting!  Safe Chainsaw Starting...

Sharpening A Chain

Sharpening a chain is important for the safe use of your chainsaw and ease of use during jobs. You don't want to force the saw through timber, the saw should cut at its own speed, with minimum pressur...

Tuning A Chainsaw

User safety is fundamental when using outdoor power equipment. This video will give an overview of the pre-start check and safest starting methods. It will also explain which PPE protection is needed ...
Loading...